Litepanels Gemini 2x1 Soft Panel - Bare Ends - Pole Operated Yoke

Flexibility and control are key to the creation of the Gemini 2x1 RGBWW LED Soft Panel with Pole-Operated Yoke and Bare Ends Power Cable from Litepanels. The aluminum-constructed, 25.0 x 6.5 x 12.5" fixture has three lighting modes. The CCT color temperature control has six factory presets in increments from 2700 to 6000K. There are also 6 presets for user-defined color temperature and plus/minus green control. The HSI Color mode allows you to adjust the hue, saturation, and intensity, while Gel mode permits your choice from a library of filters often used by image makers. A firmware update adds a Lighting Effects Mode that includes TV simulation, hue burst, paparazzi, strobe, fire, squares, fireworks, emergency lights, pulse, and party lights. The light has a CRI/TLCI rating of 97 for daylight balance and 99 for tungsten balance, indicating a very accurate rendition of color. The Gemini is dimmable from 100 to 0% without flicker or color shift. Settings and features are displayed on the rear LCD screen.

All of these adjustments can be made locally on the unit or remotely via a console, thanks to the Gemini's built-in DMX. There's even the option of wireless DMX or Bluetooth control via a separately purchased remote module. The Gemini is ready for worldwide use, thanks to its built-in 100 to 240 VAC power supply but it can also run on batteries when power is unavailable.

The Gemini has a number of convenience features, such as the ability to stack and gang several lights together with an optional yoke and hardware. You can also daisy-chain multiple lights together in Master/Slave mode, allowing a single designated "Master" light to control the others. This version of the Gemini ships with a bare ends power cable and a pole-operated yoke that allows pan and tilt adjustments from below overhead mounted lights.